Chapter 9 Interfaces
ZyWALL ATP Series User’s Guide
258
Each field is explained in the following table.
9.7.2 VLAN Add/Edit
Select an existing entry in the previous screen and click
Edit
or click
Add
to create a new entry. The
following screen appears.
Table 104 Configuration > Network > Interface > VLAN
LABEL
DESCRIPTION
Configuration
/ IPv6
Configuration
Use the
Configuration
section for IPv4 network settings. Use the
IPv6 Configuration
section for IPv6
network settings if you connect your Zyxel Device to an IPv6 network. Both sections have similar
fields as described below.
Edit
Double-click an entry or select it and click
Edit
to open a screen where you can modify the entry’s
settings.
Remove
To remove an entry, select it and click
Remove
. The Zyxel Device confirms you want to remove it
before doing so.
Activate
To turn on an entry, select it and click
Activate
.
Inactivate
To turn off an entry, select it and click
Inactivate
.
Create Virtual
Interface
To open the screen where you can create a virtual interface, select an interface and click
Create
Virtual Interface
.
References
Select an entry and click
References
to open a screen that shows which settings use the entry.
See
for an example.
#
This field is a sequential value, and it is not associated with any interface.
Status
This icon is lit when the entry is active and dimmed when the entry is inactive.
Name
This field displays the name of the interface.
Port/VID
For VLAN interfaces, this field displays
• the Ethernet interface on which the VLAN interface is created
• the VLAN ID
For virtual interfaces, this field is blank.
IP Address
This field displays the current IP address of the interface. If the IP address is 0.0.0.0, the interface
does not have an IP address yet.
This screen also shows whether the IP address is a static IP address (
STATIC
) or dynamically
assigned (
DHCP
). IP addresses are always static in virtual interfaces.
Mask
This field displays the interface’s subnet mask in dot decimal notation.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
Reset
Click
Reset
to return the screen to its last-saved settings.
Содержание ATP200
