21
P-660RU-Tx v2 Quick Start Guide
• Click the wizard icon (
). Run the
Internet Setup
wizard again. Check whether you can access the Inter-
net.
If you still cannot access the Internet, take the following
steps:
• If you are using
Bridge
mode (check
Mode
in the
Net-
work
>
WAN
>
Internet Connection
screen) click
NAT
>
General
and ensure
Active Network Address Trans-
lation (NAT
) is not selected. Click
LAN
>
DHCP Setup
and ensure that
DHCP
is set to
None
. Your ISP gives
your computer an IP address directly. If you want to
access the P-660RU-Tx v2 again, you need to use a
static IP address in the same subnet as your P-660RU-
Tx v2 (the P-660RU-Tx v2’s default IP address is
192.168.1.1).
• Click the wizard icon (
). Run the
Internet Setup
wizard again. Check whether you can access the Inter-
net.
If you still cannot access the Internet, contact your Internet
Service Provider.
Viewing Your Product’s Certifications
1
Go to
2
Select your product from the drop-down list box on the
ZyXEL home page to go to that product's page.
3
Select the certification you wish to view from this page.
