5
P-660RU-Tx v2 Quick Start Guide
"
Do NOT connect the same computer to both the
USB
and
ETHERNET
ports on the P-660RU-Tx
v2.
1 USB
:
Connect the provided USB cable to the P-660RU-Tx
v2’s
USB
port.
2 DSL
: Use the gray telephone wire to connect your P-
660RU-Tx v2’s
DSL
port to a telephone jack (or to a
splitter, if one is already installed).
3 POWER
: Use the power adaptor provided with your P-
660RU-Tx v2 to connect an appropriate power source to
the
POWER
socket. Make sure the power source is on.
4
Push in the
POWER
button.
5
Look at the lights on the front panel.
• The
POWER
light blinks while your P-660RU-Tx v2 starts up
and stays on once it is ready.
• The
DSL
light is on when the P-660RU-Tx v2 has a DSL
connection.
• The
USB
light turns on if the USB port is properly connected,
and blinks when there is traffic.