___________________________________________________________
ZYTEQ pty ltd
PO Box 190South Melbourne Victoria 3205
Ph: 03 9696 2944 Fax: 03 9696 1755 Freecall:1800 818 353
Email:
Website:
www.zyteq.com.au
A.B.N. 81132 895 268
One of the many benefits of the Jabbla devices (Tellus, Mobi and Zingui) is that they
can be turned on by pressing an external switch. This is very useful for someone who
may have difficulty using the device’s on /off button.
To allow the device to be turned on with a switch you will need to enable it in the Jabbla
tools by following the steps below:
1. The Jabbla tools program is located in the Windows desktop tray. Using a
mouse or stylus right click on the
icon to bring up the menu below.
2. Select
Tellus 5, Tellus 4 or Mobi 2 options
and the following dialogue box will
open.
3. Next to
Switch 1 starts device
select the amount of time that the switch should
be pressed before the device turns on. In our experience 2 seconds is a good
length of time as it is not too difficult for most people to press the switch for that
amount of time and also helps prevent accidental presses. Of course, you can
select the length of time that suits you.
4. Select
OK
