ZyLink Bridge/App PAIRING:
In order to use your iPhone or iPad with ZyLink, after launching the
ZyLink App, a screen will prompt you to link to any ZyLink devices
within the vicinity. If ZyLink does not appear, be sure that your Bridge
is charged and powered on with a green indicator light gently flashing
next to the large power button. Press CONNECT to pair your iOS
device with the local ZyLink Bridge.
CHANNEL SELECTION/MODES:
After you pair with a ZyLink Bridge, the App will automatically present
one of several MODE screens:
WHITE - COLOR - PRESET - EFFECT or SETTINGS.
Start by creating a matrix of individual lights or groups of lights. Every
light can be on one of 10 individual ZyLink channels with each control
change affecting every fixture on that channel within each fixtures
ability to do so.
page 5
so. For example, if an F8 LED Fresnel and an IS3 fixture are linked to
the same ZyLink channel, manipulating color on that channel will only
affect the IS3 with it’s built in color mode. However, manipulating the
brightness level on that same channel, will change the brightness on
both fixtures. For the greatest control, select a different channel for
each fixture you are using. If you have more than 10, then thank you,
you own a lot of Zylights! You can set up multiple lights on the same
channel and control them at the same time. ZyLink is meant to give
you greater control and flexibility on a set, but it does have it’s
limitations, and is not meant for live event switching. If you need to
have specific cued controls over your fixtures, we
recommend using DMX as a more robust way to control your set
fixtures.
WHITE MODE:
White mode allows you to control BRIGHTNESS, and on some fixtures,
actually control color temperature and/or PLUS/MINUS GREEN for
color correction control.
COLOR MODE:
Color mode allow you to not only control
BRIGHTNESS, but also SATURATION and
the ability to dial in a color on the COLOR
WHEEL. The approximated color is shown
in the center of the COLOR WHEEL.
In both WHITE and COLOR MODES, you
have the ability to SAVE PRESETS so you
can recall them at a later time or for
multiple takes on a given scene.
page 6
SPECIFICATIONS
Size
2.0” x 2.3” x 1.2” [50mm x 58mm x 30mm]
Weight
2 oz [56g]
Power Requirement
5VDC via USB Mirco
Operating Range
-20 – +40 C
Wireless Frequency
Bluetooth, 2.45 GHz
Wireless Channels
10, User Selectable
Assembly Materials
Composite Reinforced Thermoplastics
Calibration
Factory
IP Rating
20
LEDs
40,000 hrs. min. Lifetime
Certifications
IEC, IC, CE, RoHS
2 Year Limited Warranty:
Zylight LLC warrants to the original end user customer of its products that its products are free from
defects in material and workmanship under normal use for (2) years from the date of purchase. Except
as provided herein, Zylight LLC makes no express warranties, and any implied warranties, including
those of merchantability and fitness for a particular purpose, are limited in duration to the duration of the
written limited warranties contained herein. For full warranty details, go to
www.zylight.com/newz-warranty.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
Register your instrument at - www.zylight.com/product-registration
Registration has its benefits!
- Proof of Ownership– Create a record in case your product
is lost or stolen
- Receive Notifications – You’ll be notified of the latest firmware and
software updates and improvements to get the most out of your
Zylight product.
Zylight will not sell or share your information with anyone.
page 8
EFFECTS MODE:
The ZyLink App also give you the ability to create special effects
with your Zylights. Create FADES, CROSSFADES, STOBES, POLICE
LIGHTS, and FLAME FLICKERS. Each of the EFFECTS allow for
different variables such as duration, resets, replays, brightness, and
other variables specific to that particular effect. We will continue to
improve and add to the amount of special effects your Zylights can
create.
SETTINGS MODE:
Should your App become unlinked or out of range, the SETTINGS
MODE will allow you to reconnect with your ZyLink Bridge.
page 7
