Zylight Go-Panel, Инструкция пользователя

Страница: 8 / 20

Page 7
On/Off & Dimming
To turn the Go-Panel ON, press and release the left Dimmer knob. Press and release
the knob again to turn the fixture OFF. Turn the Dimmer knob to the right to increase
brightness 0-100% and to the left to decrease brightness 100%-0%.
LED Display:
The LED display will shut off after 5 seconds of inactivity. To make
the display reappear, press either knob.
When the fixture is turned OFF or the power is lost unexpectedly, the ON/OFF setting,
last set dimming point, color temperature, white balance (±Green), Active Diffusion,
and DMX channel will be saved to memory.
Color & Diffusion Adjustment
The right Mode knob has three adjustment modes.
1. Color Temperature
2. White Balance / ± Green
3. Active Diffusion
Press the right Mode knob in quickly to switch between each adjustment mode.
Color Temperature Adjustment
Turn the color knob to the right to increase color temperature and to the left to
decrease color temperature.
LED Display:
The LED display will shut off after 5 seconds of inactivity. To make
the display reappear, press either knob. The last set color temperature point will be
saved to memory when the fixture is shut OFF or power is lost.
Accessory Plate
for Ball Mount,
Battery Mount,
or Power Supply
Mount
Power &
Dimming
CCT Control,
±Green,
Active Diffusion,
Radio Control,
DMX Setting
DC In
Friction
Hinge
RJ45 DMX In/Out,
USB Software Jack
Safety Cable Port
100% 5600K