Zykronix ZIP10-KB, Руководство пользователя

Страница: 30 / 61

26
www.Zykronix.com
7.4.3 Speed Dial and System Subscribers Table
Note:
Speed Dial Destination dialing is relevant for Keypad Housing edition only. Single button Door Phone allows Day and Night destination
dialing
The IP Door phone provides an option to create up to 99 System subscribers. Each system subscriber can be
identified by its SPD number (
Speed Dialing Code ) and includes a set of destination telephony numbers where
subscriber can be reached when appropriate SPD code dialed from the IP Door phone keypad.
Alternatively the System subscribers can be reached by using ▲▼arrows buttons from the IP Door Phone keypad.
Speed dial table purposed to configure the IP Door Phone Speed dialing destinations / System Subscribers.
Figure 7-14 Speed Dial and System Subscribers Table
Parameter Description
Speed Dial No.
Parameter shows with 2 digits the Speed dial table number. Each table
includes 10 records.
Switching to required table is available by typing the table number in the
text field and followed ‘Select’ button or by using the ▲▼ arrows buttons
SPD
The Speed dial destination code. This code can be dial from the IP Door
Phone front panel keypad or selected by using the LED Display and
arrows keys. Dialed SPD code and follows ‘Ring’ button initiates dialing to
SPD destination number
Day Time Destination
The destination telephony number which associated with the SPD code
and will be dialed in ‘Day’ operational mode
For Peer-to-Peer calls enter the destination in format:
sip:XXX.XXX.XXX.XXX: NNNN, where,
XXX.XXX.XXX.XXX
– destination peer IP address in IPv4 format
NNNN
–
SIP Signaling
port number, ‘5060’ in default settings