Zycoo Ei Series, Руководство пользователя

Страница: 14 / 27

Network Speaker User Guide | ZYCOO Co., Ltd.
11
Press-to-Talk

Press-to-Talk Number: This setting represents the number will be dialed by using Key.

Line: Line represents the line that will be using to dial the call.

Press Again to End Call: Enable/Disable. If this setting is enabled, then press the key twice will end
the call when it’s in process.
Sensor Settings
Per the specification if the sensor, select from “Falling Edge” or “Rising Edge” as the trigger, and then setup
the number to dial, so, when the sensor sends the corresponding digital level signal to the SIP paging gateway
device, it will dial the given number.
 Sensor Detection: Enable/Disable, enable this option to detect any digital level signals.
 Trigger Mode: There are “Falling Edge” and “Rising Edge” options for the trigger.
 Dial Number: Enable/Disable, enable this option if you need to dial a number when the
corresponding digital signal is received.
 Number: The number that need to dial
 Line: Line represents the line that will be using to dial the call.
 Trigger Audio: Select the audio to play when sensor is triggered.