Zxch Venus V6T, Руководство пользователя

Страница: 41 / 46

40
1. In order to maintain and prolong the working life of your treadmill, we suggest you power off for
10 minutes after every 2 hours’ running.
2. The loose running belt will lead slip when you are running; the tighten running belt will affect the
performance of the motor, also can increase the wearing of the rollers and running belt. The
perfect state is that the belt can be lift from the running deck about 50-75mm.
Belt Middle Placement and Tightness Adjustment
It is very necessary to adjust the belt to the best condition for the better use of the treadmill and the
treadmill can work better.
Belt Middle Placement
Put the treadmill running belt at the center:
Put the motorized treadmill on the level ground.let the treadmill run at the speed of 6-8 miles per
hour,observe the running belt deviating condition.
If the running belt deviate to the right,pull off the safety key and unplug the power,turn the right side
adjusting bolt clockwise by 1/4 circle,plug the power ,safety key,make the treadmill run,watch the
running belt deviating condition.Repeat the above steps,until the running belt is in the
middle.
Picture A
If the running belt deviate to the left,pull off the safety key,unplug the power,turn the left adjusting
bolt clockwise by 1/4 circle,plug the power,safety key,make the treadmill run,watch the deviating
condition of the running belt.Repeat the above steps,until the running belt goes to the
middle.
Picture B.
After the above adjustment or a period of time’s use,running belt would become loosen,need
adjustment.Pull off the safety key,power switch,and turn the left and right adjusting bolt clockwise by
1/4 circle,plug power,safety key,make the treadmill run,then stand on the treadmill to confirm the
tightness.Repeat above steps,until the running belt is moderate in tightness.
picture C.
Ploy V-Belt looseness and tightness Adjustment
The ploy V-Belt will gradually loose and change the shape after a long time use and you
图A 图B 图C
PIC A PIC B PIC C