Zwilling Fresh & Save Vacuum Storage System, Руководство по эксплуатации

Страница: 14 / 100

14
Use EN
All boxes can be used to heat food in the microwave. Before
starting, make sure that the vacuum is released and the lid is
loose.
The opening of the bag has to be completely clean and dry.
Ensure that the valve inside the bag remains clear and does not
come into contact with its contents. The pump must not absorb
any liquids (e.g. water, oil, meat juices). If you notice that liquid
is being sucked in towards the pump/liquid barrier, stop the
vacuuming process immediately by pressing the ON/OFF
button.
1
Charging the vacuum pump
To maintain optimal battery function, charge at least once every
3 to 6 months.
Charge the vacuum pump fully before the first use. Insert the smaller mi-
cro USB connector into the port on the upper side of the vacuum pump.
Insert the larger USB connector (USB 2.0) into a power adapter* and
plug it into a wall socket. You can also connect the charging cable to
the USB port of a computer. Charging can take 2 to 5 hours.
2
Vacuum sealing of boxes, bags and bottles
Place the vacuum pump on the valve of the box/the bag and press
down lightly. Press the ON/OFF button on the pump. The pump sucks
the air out of the box. The vacuum sealing stops automatically when the
vacuum pressure reaches the right level. The vacuum sealing can also
be manually stopped at any time by pressing the ON/OFF button.
Clean the vacuum boxes before using them for the first time.
Before each use, make sure that the seal of the lid and the edge
of the box are clean and dry.
Do not overfill the box. Always leave 0.39 - 0.79 in free to the
edge. Make sure the food inside the box does not come in
contact with the valve on the inside of the lid.
* Power supply unit specifications can be found in the technical data.
2.
1.