Controlling the AccuVoice TV Speaker
With Another Remote
The OTHER SETTINGS button can be used to adjust the
SB380 so it responds to one of many cable, satellite or TV
remote controls. Consult the separate information sheet in-
cluded with the SB380. Visit www.zvox.com for help regard-
ing this “works with your preferred remote” feature.
The supplied ZVOX remote control will always adjust the
SB380, even if one also uses his or her preferred TV remote
to control VOLUME, MUTE and POWER on the AccuVoice
TV Speaker Model SB380.
Input Panel Infrared Sensor
The SB380 features an input panel infrared sensor. This
sensor allows a wired infrared emitter positioned in the input
panel recess to control the SB380’s operation .
Manual On/Off Operation
As delivered, the SB380 turns ON and OFF automatically in
response to the audio signals from the TV and the POWER
button on the remote control. If you do not want the SB380
to automatically turn on and off in response to the TV’s audio
signal, the SB380 can also be configured so it only responds
to the remote control POWER button.
The POWER button on the ZVOX remote control allows you
to switch between Auto On/Off and Manual On/Off modes.
To switch modes, first make sure the SB380 is “ON”. Then
press and hold down the POWER button for five seconds.
When you see
noAS
appear on the display, release the
POWER button.
noAS
indicates that Manual On/Off mode
has been selected. To switch back to Auto On/off mode,
press and hold down the POWER button for five seconds
again. Release the POWER button when you see
AS
appear
on the display.
AS
indicates that the Auto On/Off mode has
STILL NEED ASSISTANCE? If your TV is not the same as the
descriptions in this guide, don’t hesitate to send an inquiry to
[email protected] or call ZVOX Audio at (866) 367-9869. Please
provide your TV brand and model number. A ZVOX Audio repre-
sentative should be available (Eastern Time Zone) 9:30 AM to 7:30
PM Monday through Friday and 10:30 AM to 5:30 PM on Saturday.
For further information about additional options, please refer to the
ZVOX Audio website, www.zvox.com.
USA Warranty
For warranty information applicable to an
SB380, please visit this webpage:
https://zvox.com/pages/warranty-returns
Infrared Sensor Window
Using Both Audio Inputs on the SB380
If you have your TV’s optical digital output connected to the
SB380’s optical digital input, you can also use the SB380’s
analog RCA jacks input (Input 3) for a second audio source.
This second source could be the headphone output of a
straight-forward audio player device or a voice assistant
device (for instance, an Amazon Echo).
Audio Player Device Selection
If you connect an audio player device to Input 3 on the
SB380, select it by pressing the INPUT button on the SB380
remote control until you see
In3A
. Selecting
In3A
lets you
hear just the analog device connected to the SB380.
Voice Assistant Device Selection
If you connect a voice assistant device to Input 3 on the
SB380, press the INPUT button on the SB380 remote control
until you see
both
appear on the display. Selecting
both
nor-
mally connects you to the optical digital audio input (prob-
ably your TV) unless the voice assistant device becomes ac-
tive. In this case, the SB380 will interrupt the audio program
on
In1d
and let you interact with the voice assistant device.
The SB380 will automatically return to the digital audio
source (probably your TV) when the session with the voice
assistant device has finished.
NOTE: If using a Voice Assistant device, be sure to set its
volume to the maximum level for good balance between
the TV and the smart device. If you still need more volume,
contact our Audio representatives for additional help.
Miscellaneous - SB380 Soundbar
9
