ZM111317
4
3 Network Configuration
The IP camera defaults to DHCP. If you are connecting directly to NVR the NVR will assign the
IPC an IP address. If you are connecting IPC to XVR or hybrid DVR accepting IP camera or if
camera is connected directly on network router make sure you change to a static IP. NOTE:
ALWAYS CHANGE PASSCODE TO IP CAMERA FOR IMPROVED SECURITY.
3.1 Modify IP Address
IP address can be acquired and modified through our quick configuration tool for the cameras
which are accessed via wired network, it needs to connect wired network to configure wireless
parameters before using wireless network cameras. In this chapter, it will introduce the approach
of modifying IP address via “Quick Configuration Tool”; also, you can modify the IP address in the
network parameters of the WEB interface, please refer to the document link for Config Tool.
Note:
Currently the quick configuration tool only supports the cameras which apply to the same network
segment with computer IP address.
Step 1) Double click the “ConfigTools.exe” and open the quick configuration tool.
Step 2) Double click the device to be configured, the system will pop out the “Login” dialog box.
Enter the IP address, user name, password and port number of the camera, and click
“Confirm”.
Note:
The default user name and password are admin and admin respectively, the default of port is
37777. See Figure 3-1 for more details.
Figure 3-1
