ZM111317
2
2
Device Installation
Note:
l
The device installation steps may be different due to the different appearance and structure,
please refer to 2.1 according to the actual product.
l
Please make sure the installation surface can support 3X’S THE weight of the camera and
the bracket.
2.1
Install Device
Figure 2-1
Please see Figure 2-1 and Figure 2-2.
Step 1
Dig holes on the installation surface (wall or ceiling).
Step 2
Open accessories bag, take out expansion bolt and insert it into the hole you just dug.
Step 3
Open accessories bag, take out installation screws. Tighten the screws to fix the device on the
installation surface (wall or ceiling). You can move device sunshade back and forth. When you
have fixed the device, you must tighten screws on sunshade.
Step 4
Plug external wiring of the device properly.
