ZM111317
i
Welcome
Thank you for purchasing our Network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual for future reference!
Important Safeguards and Warnings
1
．
Electrical safety
All installation and operation here should conform to your local electrical safety codes.
Please check if the power supply is correct before operating the device.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC, DC5V or AC24V in the IEC60950-1. (Power supply requirement is
subject to the device label).
Please prevent the line cord from being damaged, especially the plug, power socket and the junction
from the device.
Note: Do not connect PoE and standard 12V power supply sources to the device at the same
time; it may result in device damage!
We assume no liability or responsibility for fires or electrical shock caused by improper handling or
installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2
．
Environment
Please do not aim the device at strong light (such as lighting, sunlight etc.) to focus; otherwise it may
cause overexposure (It is not the devices malfunction), which will affect the longevity of CCD or CMOS.
Please transport, use and store the device within the range of allowed humidity and temperature.
Please don’t keep the device in a place which is wet, dusty, extremely hot, and extremely cold and with
strong electromagnetic radiation or unstable lighting.
Please do not allow water and other liquid to fall into the camera to prevent internal components to be
damaged.
Please keep the camera well ventilated to prevent heat accumulation.
Please pack the device with standard factory packaging or material with same quality when transporting
the device.
Heavy stress, violent vibration or heavy water splash are not allowed during transportation, storage and
installation.
3. Operation and Daily Maintenance
Please do not touch the heat dissipation component of the device directly to avoid burn.
Please do not dismantle the device; there is no component which can be fixed by users themselves in
the camera. It may cause water leakage or bad image for the device due to unprofessional dismantling.
It is recommended to use the device with surge proof device to improve surge resistance.
