background image

PHIX

®

 Cartridge System

Owners Manual

5

Figure 1.1 PHIX  Media Required to Neutralize 1 g (0.03 oz.) of HCl

0

5

10

15

20

25

30

Marble

Limestone

PHIX Media 3000

PHIX Media 2000

0.6

0.55

3.36

25.87

Types of Neutralizing Media

Amount of Media (grams)

PHIX Media is five times more efficient than limestone and 43 times more efficient than marble chips.

PHIX Media vs. Traditional Acid Neutralization Chemicals

PHIX MEDIA

LIMESTONE

CAUSTIC SODA

Safety

Contact with skin rarely 

causes irritation.

Hazardous to handle.

Extremely hazardous to 

handle.

Environmental Effects

Harmless with no by-

products.

Highly caustic and can 

cause immediate damage 

to the environment.

Highly corrosive causing 

severe physical injury 

to plant and animal life 

coming in contact with it.

Ease of Handling

No special handling or 

equipment required.

Expensive solids and 

handling equipment is 

required.

Requires elaborate safety 

equipment and rigorous, 

time-consuming safety 

procedures.

Equipment Costs

No initial capital cost.

Initial capital cost 

required. Expensive and 

regular maintenance 

required due to the 

abrasiveness of lime.

Expensive capital and 

maintenance costs. 

Regular maintenance, 

heated system and safety 

equipment required.

Application

Flow through system.

Conventional batch 

treatment system.

Conventional batch 

treatment system.

For more information on PHIX Media, please contact a Zurn Customer Care Representative at 1-855-ONE-ZURN 

or visit www.Zurn.com.

Содержание PHIX





















Отзывы: