background image

18

PHIX

®

 Cartridge System

Owners Manual

6)  General Terms and Conditions

Price and Terms of Payment

Terms are net, payable 30 days from date of invoice. All pricing in U.S. currency. The Buyer shall pay 

all sales, consumers, or other applicable taxes. A 1-1/2% monthly (18% annual) service charge will be 

added to the outstanding balance of all past due invoices.
Minimum invoice $100.00. Zurn Industries, LLC ("Zurn") reserves the right to apply a minimum order 

charge in order to meet the $100.00 minimum invoice requirement. All orders are subject to credit 

approval by the Zurn Credit Department prior to the acceptance of an order. Orders may be refused, 

delivery may be withheld, or shipment stopped in transit without any liability on Zurn’s part at Zurn’s 

sole discretion based upon Buyer’s credit worthiness as determined by Zurn.

Freight

Zurn is pleased to provide an industry-leading $3,500 combined freight rate. Please see below for 

specific policy details.
All sales are F.O.B. seller’s location. Zurn will allow full freight allowance when any of the following 

conditions are met:
1)  any combination of Specification Drainage, Light Commercial, Commercial Brass or Wilkins orders 

of $3,500 or more;
2)  Linear Drainage and Chemical Drainage orders of $5,000 or more; 3) any Combination of 

Specification Drainage, Light Commercial, Commercial Brass, Wilkins, Linear Drainage and Chemical 

Drainage orders of $5,000 or more; 4) Zurn One Systems orders of $7,500 or more; 5) fixture only 

orders totaling $10,000 or more. This full freight allowance applies when the shipment is within the 

continental United States and has a single destination of a buyer’s standard address or job location. 

Routing of shipment shall be determined at the sole direction of Zurn . Shipping dates are estimates 

and time of delivery shall not be of the essence of this sale contract. Under no circumstances will the 

Seller have any responsibility on account of any delays in manufacture, transportation, or otherwise. 

Terms of Export Shipment on application.
NOTE: Any product dimension larger than 92" or any single item weighing more than 3,500 lbs., shall 

be defined as an oversized and/or overweight product and Zurn’s standard FFA terms may not apply. 

Please contact our customer service department for guidance on potential additional shipping charges.
These charges and restrictions apply in addition to Zurn standard terms and conditions for sale unless 

otherwise agreed upon by the parties.

Limited Warranty

Zurn goods sold hereunder are warranted to be free from defects in material and factory workmanship 

for the period of time from the date of purchase: AquaVantage

®

 Flush Valves, AquaFlush

®

 Flush 

Valves, Commercial Fixtures, Faucets, Showers, and Tubular Brass three years; Chemical Drainage, 

Linear Drainage, Light Commercial, Specification Drainage, Zurn Wilkins, and Flush Valve and Tubular 

Brass decorative finishes one year; PHIX cartridge ten years. Where permitted by law, THE IMPLIED 

WARRANTY OF MERCHANTABILITY IS LIMITED TO THE ABOVE IDENTIFIED PERIOD OF TIME AND 

SHALL BE
LIMITED SOLELY TO THE REPLACEMENT OF THE DEFECTIVE GOODS. A damaged/broken test cock 

or ball valve is not considered defective. Please contact Zurn Customer Care for assistance.
Zurn will replace goods at no cost that prove defective provided Zurn is notified in writing of such 

defect and the goods are returned prepaid at the specified Zurn location with evidence that they 

have been properly maintained and used in accordance with instructions. ZURN SHALL NOT BE 

RESPONSIBLE FOR ANY LABOR CHARGES OR ANY LOSS, INJURY, OR DAMAGES WHATSOEVER, 

INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL
DAMAGES. The sole and exclusive remedy shall be limited to the replacement of the defective goods. 

Before installation and use, the purchaser shall determine the suitability of the product for his intended 

use and the purchaser assumes all risk and liability whatever in the connection therewith. All weights 

stated in Zurn catalogs and lists are approximate and are not guaranteed.

Содержание PHIX





















Отзывы: