PAGE 14
JAN-12
Filling from the a dam, brook or a river
For that kind of filling, you must have permission from the water department.
Filling from a tank
The threat that is present by filling from a tank is spilling; never leave the sprayer while filling.
Height of the filling
The tank can be filled only to the sign MAX on the scale. The rest is
for the foam and the decanting of the suspension, while working on
slopes.
Emptying the tank
Rotate the red handle of the ball valve on the lower part of the
tank – see photo. Putt a vessel under the outlet, which will hold
the fluid, then turn the red handle, to empty the tank. After total
emptying the tank, turn the handle back in the work position.
10. HOW TO USE THE REMOTE UNIT
The remote control RM 40 is used to engage the pressure and to open (or close) the left and
the right nozzles.
Pressure regulation
- pull the reed adjustment knob in the position 1
- with turning the adjustment knob in to the right (clockwise) the pressure will increase
- with turning the adjustment knob in to the left (counterclockwise) the pressure will decrease
- after pressure adjustment bring the adjustment knob in to position 2
- do the pressure regulation by opened nozzles
By pass (completely fluid stream is going back to the tank):
- reed adjustment knob turn in the position 2 in to the right (clockwise)
- pressure on the pressure gauge is displaying at 1 bar, completely fluid stream from the pump
is now going back to the tank – can be used by mixing the protection agent
- for work, turn the adjustment knob to the left (counterclockwise)
Opening the nozzles in the left and right side:
- if the handle on the ball valve is rectangular to the valve – nozzles are closed
- if the handle on the ball valve is parallel to the valve – nozzles are open
