Page | 17
Step 8 - Connection Results
If the password was accepted by the wireless network, you will get a “connection successful” message. If this is the case,
continue to the next step. If you get a “connection un-successful” message, click the “
Back
” button to restart the Setup
Wizard and verify you have selected the correct WiFi network and that the password you are using is correct.
Step 9 - Configure LAN (Ethernet) Parameters
The pre-entered default values should work for most networks, but if they need to be modified you can do so now. Unless
you are an advanced user we recommend that you use these default settings when creating your Local Area Network
(LAN), because changing the default values listed may interfere with the router's operation. Once the values are correctly
entered, press the “
Next
” button.
