Page | 15
are using a USB cable, you can provide power to the router from any electronic device with a USB port (device must be
on to power the router). Please wait 30 seconds for the router to fully boot up before continuing to the next step.
Step 3 - Access Web Configuration
From your computer, open a Web browser (Internet Explorer, Firefox, Safari, etc.) then type 192.168.11.1 into the address
bar and press the
ENTER
key.
Step 4 - Setup Login
In the login window key in the default User Name (
admin
) / Password (
admin
) and click the LogIn button.
Step 5 - Enter Setup Wizard
Select Extender/Bridge Mode from the Setup Screen to run the Setup Wizard.
Step 6 - Select Wi-Fi Network to Connect With
The setup wizard will scan for available networks. Select the wireless network from the table that you want to connect the
ZR301 to and click the “
Nex
t” button. If the desired network is not listed click the “
Refresh
” button to restart the scan.
