Zumtobel LUXMATE CIRIA, Инструкции по запуску и использованию

Страница: 106 / 142

Commissioning the field level
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en 106
Defining a maximum delay time for scene changes
Figure 165:
DELAY TIME MAX
settings level
–
Start point: DELAY TIME MAX settings level
6. Select MINUTES .
=
MINUTES illuminates.
7. Run your finger along the touchring until the desired number appears.
8. Select SECONDS .
=
SECONDS illuminates.
9. Run your finger along the touchring until the desired number appears.
10. Select SAVE to save the settings.
=
The message SAVED briefly appears.
=
Maximum delay time is saved.
=
SEQUENCE selection level appears.
Notes
•
Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• If no delay time is defined, a random delay time of between 2 and 10 minutes is automatically
applied.
• To switch to the START SCENE settings level directly (without saving), select NEXT STEP .
Parameter Value range
MINUTES 0 – 99
SECONDS 0 – 59
Table 63: DELAY TIME MIN setting options
Parameter Value range
MINUTES 0 – 99
SECONDS 0 – 59
Table 64: DELAY TIME MAX setting options
Notes
•
Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• To switch to the START SCENE settings level directly (without saving), select NEXT STEP .