011302/01
4
•
Unscrew the bottom nut from the puller. An open-ended wrench will be required
(Figs 6e and 6f).
6d
6e
6f
•
Extract the runner with its spring and puller (Fig. 6g).
ASSEMBLY
•
Screw the nut onto the puller, fit the washer and screw the puller onto the runner.
There should be 210 -211mm free after the nut (Figs. 6h - i - j - k)
6g
6h
6i
6j
6k
6l
•
Make sure that the puller is as perpendicular to the runner as possible.
•
Grease the puller, fit the spring and grease it (Figs. 6l and 6m).
•
Grease the operating area (Fig. 6n).
