6
Adjust an angle greater than 10 degrees between the camera PIR lens and the moving
objects
6.1 For wooden wall, it's recommended to screw the
bracket on.
6.2 For cement or ceramic tile wall, it's
recommended to drill holes in the wall and fasten
with provided explosion screws; Rotate the button
counterclockwise to take off the camera.
6.3 It's suggested to test Wifi signal strength
(at least 80-85%) before you choose the place to install the camera to ensure camera
functions normally.
6. Camera Installation
：
7. Monitoring Area
：
360°
It's not suggested to make
the PIR sensor vertically
towards the moving objects
The path of the
moving object
Entrance
