MXmeeting Release v6.0 M200/M500 & M800/M1000
Admin Guide (0000000202)/ Revision 7 5/9/2016
© 2016 Zultys, Inc. No reproduction of distribution without permission
Page 41 of 42
Technical
Publications
The MXmeeting appliance does three things during the reset:
1.
It resets the system administrator account to the default one: "admin" as the email and
"password" as the password. If you have multiple administrators, it only resets the first
one's account.
2.
It changes the IP settings to use DHCP.
3.
It removes your own system home page URL so that you can easily access the appliance
by a new IP address.
The reset does not affect any other data including user profiles, meeting logs, scheduled
meetings, SSL certificate, audio integration setting, etc.
To reset the MXmeeting M200/M500 appliance, you just push a pin into the reset button on the
back and hold it for over 6 seconds until the “Ready” light turns off. After over 20 seconds when
the “Ready” light turns on, you can access the appliance.
To reset the MXmeeting M800/M1000 appliance you need to connect it with your monitor,
keyboard and mouse. The server runs in a Fedora Linux system. The default operating system
login name is "turbomeeting" and the password is "password". After logging in, right click on
the desktop and open a Terminal session. Type "./ResetTM", which resets the appliance. Then
open a browser and type "http://localhost" to access the MXmeeting administration pages. Use
the system default account: "admin" as the email and "password" as the password.
Refer to the Section 1.1 about how to access to your appliance after the reset.
8
Support Contact
If you purchased the MXmeeting Appliance from a Zultys value-added reseller, please contact
them for support. If your reseller is not able to provide you adequate support, your reseller will
contact us or you can contact us directly.
Zultys, Inc.
785 Lucerne
Sunnyvale, CA 94085
Tel: 408-328-0450
Fax: 408-328-0451
