MG Series Gateway Setup Manual ver 306.X (0000000272)
Revision 20 Jul. 12, 11
© 2011 Zultys, Inc. No reproduction of distribution without permission
Page 3 of 42
Technical
Publications
OU NEED TO S ET UP THREE PARAMETERS ON THE
FXO ................................................................. 40
FXO ........................................................ 40
....................................................... 40
) ................................................................. 41
MX ............................................................. 41
(4FXO/4FXS ) ........................................................................ 41
. ....................................................... 42
MES S AGES ARE BEING S ENT TO THE
MG ............................... 42
...................................................................... 42
INFORMATION IS INCORRECT AFTER UPDATING A
.............................. 42
2
Configure all ports on the MG
You MUST configure all ports on the MG, if you fail to configure all ports (even if
you are not using them) the MG will continue to attempt to register, this action
devices to block the IP of the MG itself.
3
MX250/30 S etup
It is recommended that the MX have a generic SIP device created for each FXS Port
that is on the MG to register against. The Device ID used in the MX will be the
phone number used on the MG for registration purposes; this configuration does
not count against any licensing, as the MX is not licensed by registration.
3.1
Create Us ers
Create a user for each FXS (SLT) port of the MG gateway by logging into the MX
Admin UI and navigating to
Configure | Users
.