Hardware Development Guide of Module Product
21
All Rights reserved, No Spreading abroad without Permission of ZTEWelink
20
-97
-94
-91.2
-90
FDD
21
-100
-97
-95.2
FDD
…
33
-100
-97
-95.2
-94
TDD
34
-100
-97
-95.2
-94
TDD
35
-106.2
-102.2
-100
-97
-95.2
-94
TDD
36
-106.2
-102.2
-100
-97
-95.2
-94
TDD
37
-100
-97
-95.2
-94
TDD
38
-100
-97
-95.2
-94
TDD
39
-100
-97
-95.2
-94
TDD
40
-100
-97
-95.2
-94
TDD
41
[-100]
[-97]
[-95.2]
[-94]
TDD
Note 1:
The transmitter shall be set to P
UMAX
as defined in clause 6.2.5
Note 2:
Reference measurement channel is A.3.2 with one sided dynamic OCNG Pattern OP.1
FDD/TDD as described in Annex A.5.1.1/A.5.2.1
Note 3:
The signal power is specified per port
Note 4:
For the UE which supports both Band 3 and Band 9 the reference sensitivity level of Band 3
+ 0.5 dB is applicable for band 9
Note 5:
For the UE which supports both Band 11 and Band 21 the reference sensitivity level is FFS.
6.3.4 Spurious Specification
Spurious emission meets 3GPP TS 36.101 protocol requirement.
The receiver spurious emission power refers to the spurious power generated or amplified by
the module, which is tested from the antenna connector.
The spurious emission shall meet the requirement of Table 6-9 and Table 6-10:
Table 6-8 General Requirement of Receiver Spurious Emission
Frequency range
Maximum level
Measurement bandwidth
9 kHz
f < 150 kHz
-36 dBm
1 kHz
150 kHz
f < 30 MHz
-36 dBm
10 kHz
30 MHz
f < 1000 MHz
-36 dBm
100 kHz
1 GHz
f < 12.75 GHz
-30 dBm
1 MHz
Table 6-8 UE Co-existence Spurious Emission Requirement
E-UTRA
Band
Spurious emission
Protected band
Frequency range
(MHz)
Level (dBm)
Bandwidth
(MHz)
Comment
1
E-UTRA Band 1, 3, 7,
8, 9, 11, 34, 38, 40
FDL_low
-
FDL_high
-50
1
Frequency range
860
- 895
-50
1
Frequency range
1884.5
- 1919.6
-41
0.3
Note
6
,Note
7
Содержание ZM8620
Страница 8: ......
