PREPARATION
Position the motorcycle securely on its stand.
Cover the front fender while you work.
REFER TO PAGE 3 FOR ADDENDUM
INSTRUCTIONS FOR WHITE BMW R1200R
(BMW CODE X560A)
INSTALLATION
Install Brackets
Install brackets to motorcycle one side at a time!
Following this instruction will assure you do not
distrurb headlight position!
Install Left Bracket
1.
On the left side of the motorcycle, remove the upper
and lower screws from the turn signal bracket. OEM
screws will not be re-used.
(T40 Torx Wrench) Figure 1
2. Use a M8 x 30 Screw (7) from Bag#1211 to install the
Bracket (2) at the Upper hole of the turnsignal bracket.
(6mm Hex Key Wrench) Figure 2
3. Use a M8 x 25 Screw (8) to mount the bracket (2) to
the turn signal bracket at the lower hole.
(6mm Hex Key
Wrench) Figure 2
Install Right Bracket
4. Repeat steps 1-3 on right side of motorcycle.
5. Tighten all fasteners securely.
(6mm Hex Key)
Install Windshield
6. Insert grommets (6) into windshield.
Figure 3
ZTechnik
PO Box Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.ZTechnik.com / e mail: [email protected]
©2016 National Cycle, Inc.
Page 2 of 4 10-118599-000 01/11/16
Figure 2
Figure 3
7
2
8
Figure 1
