Question
Solution
Why does the
connection between
two devices fail to be
established after the
bridge is configured?
You can do as follows to solve this problem:
l
Check whether
Working Mode
of the two devices is
Bridge
.
l
Check whether the MAC address of the remote end is correct.
l
Check whether
Country/Region
of the two devices is the
same.
l
Check whether Channel/Frequency of the two devices is the
same.
l
Check whether encryption method of the two devices is the
same.
Why do the links in a
wireless network be
unstable (for example,
increased delay or
packet loss occurs)
after the wireless
network works normally
for a period of time?
This problem may be caused by wireless interference around.
Therefore, you can do as follows to solve this problem:
l
Check whether all the cables such as network cables and
antenna cables at the wireline end of the device are in good
condition.
l
Restart the device after power-off.
l
Restore the default settings of the device and then re-config
ure the parameters.
l
Check whether the devices at the wireline and wireless ends
are infected with virus.
In the case of two
devices with bridge
already configured,
why does the Web
page of the remote
device fail to be opened
if the local device is
used to configure the
remote device through
a wireless link?
For device configuration at the wireless end, the Web server
of the remote device responds slowly. You can solve this
problem by waiting for about three minutes and then restarting
the remote device. It is recommended that you implement device
configuration at the wireline end.
B
B
B
Technical
Technical
Technical Specifications
Specifications
Specifications
Physical specifications:
l
Size: 180mm×180mm×49mm (L×W×H)
l
Device weight: 300g (excluding the power adapter)
Electrical specifications:
53
