Chapter 4 Wizard
Enable UPnP: Enables/disables the UPnP function. The
default is disabled.
WAN connection: Selects the WAN side connection
LAN connection: Selects the LAN side connection
4.7.3 DMZ
When the device operates in Routing mode, if you try to access a service
on a host placed in the intranet from an external network, the DMZ host
function should be enabled.
Click the
Advanced Configuration
button on the main page, and then
DMZ
on the left side of the page to enter the
DMZ
configuration page.
Select the LAN host IP address to be accessed from the WAL side. Check
the
Enable DMZ
check box to enable this function.
27
