Chapter 4 Wizard
1. Click the
Basic Configuration
button on the main page, and then
click the
Create WAN Connection
on the left side of the page to
enter the
PPPoE Connection Settings
page.
2.
Type in the name of the PPPoE connection to be created in the
Name
box, e.g. “PPPoE1”.
3.
Set the
NAT
and
Firewall
options to default (enable).
4.
If you select
VLAN
from
Sharing
, please configure
VLAN ID
and
Priority
according to the parameter description.
5.
Input parameters in the
PPP settings
area. Please contact your
service provider for the specific values.
6.
Input the VPI and VCI values in the
PVC settings
area. Please
contact your service provider for the specific values.
7.
Select an option from
QoS
. If you are not sure of the setting or your
service provider cannot provide you the required information, use the
default.
8.
Click
Submit
to complete the PPPoE connection configuration.
After the new connection is created, the connection name is
displayed on the left side of the page. You can use the
Connect
,
Disconnect
,
Submit
and
Delete
buttons to manage this
connection.
9.
Click the
Save
button on the page.
10. Click the
Status
button on the main page, and then the
Connection
Status
button on the left side of the page.
25
