Zte ZXV10 ET312 Скачать руководство пользователя страница 8

Страница: 8 / 84

ZXV10 ET312 User Guide

Ensure that there is no facility that impacts the heat dissipation of the device within

a 1-meter radius. Keep the heat dissipation holes of the device clean to prevent the

device from being overheated.

Do not hot swap

HDMI

cables.

The terminal and camera must be connected to power supply by using the power

adapters provided with them.

To connect the camera to the terminal, use the USB cable provided with the camera.

No extended line is supported.

Requirements for Device Maintenance

Do not plug or remove input or output connectors frequently.

After the device is powered off, wait for at least 15 seconds before powering it on.

Keep the device clean.

Before cleaning the product, power it off, and remove the power cable. Use a soft and

dry cloth to clean the device case.

Power off the device and remove the power cable if the device will not be used.

Battery Security

Use batteries of the proper model and install them in accordance with the correct

polarities.

If a battery cannot be installed properly, do no forcibly press it, avoiding battery leakage

or explosion.

If a battery leaks, smokes, or releases a smell, replace it immediately.

Do not use old and new batteries together. Replace all the batteries if any battery

needs to be replaced.

If battery liquid drops on your skin or clothes, wash it with plenty of clean water

immediately, and go to hospital.

If battery liquid splashes onto your eye, do not rub the eye, but wash it with plenty of

clean water immediately, and go to hospital.

Remove the batteries if the device will not be used for a long period.

Dispose of exhausted batteries in accordance with the instructions.

Environmental Protection

Do not put scrapped devices into garbage cans. Abide by local regulations on how to

dispose of packaging materials, exhausted batteries, and scrapped devices, and support

recycling activities.

Class-A Product Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in

a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual,

1-2

SJ-20190419092037-001|2019-04-08 (R1.0)

ZTE Proprietary and Confidential

Содержание ZXV10 ET312





















































































Результаты поиска

Содержание ZXV10 ET312

Отзывы:

Похожие инструкции для ZXV10 ET312

Бренды по названию

Популярные бренды

Zte ZXV10 ET312, Руководство пользователя

Результаты поиска

Содержание ZXV10 ET312

Отзывы:

Похожие инструкции для ZXV10 ET312

Бренды по названию

Популярные бренды