Zte ZXR10 T1200, Руководство пользователя

Страница: 52 / 83

ZXR10 T600/T1200 User Manual (IPv6 Volume)
IS-ISv6 Basic Configuration
Enabling IS-ISv6
To enable IS-ISv6, perform the following steps.
St-
ep Command Function
1
ZXR10(config)#
router isis This enables an isis route
instance.
2
ZXR10(config-router)#
system-id < id > This configures system ID of
a route entity.
3
ZXR10(config)#
area < area-address > This designates the area
address of IS-ISv6.
4
ZXR10(config)#
interface < interface-name > This enters interface
configuration mode.
5
ZXR10(config-if)#
ipv6 router isis This runs the IS-ISv6 protocol
on an interface
Result: IS-ISv6 has been enabled.
Configuring IS-ISv6 Global
Parameters
To configure global parameters of IS-ISv6 protocol, perform the
following steps.
St-
ep
Command Function
ZXR10(config)#
router isis This enters IS-IS
configuration mode.
ZXR10(config-router)#
area-password < password > This configures the password
of level-1.
The character string of
password ranges from 6 to
128 characters.
There is no password of
level-1 by default.
ZXR10(config-router)#
domain-password < password > This configures the password
of level-2.
The character string of
password ranges from 6 to
128 characters.
1
44 Confidential and Proprietary Information of ZTE CORPORATION