ZXR10 5250 Series Command Reference
Parameter
Description
<
1-255
>
Maximum TTL, that is, the maximum number of hops of a packet.
<
1-255
>
Minimum TTL, that is, the number of hops allowed for the first
packet. The value of
min-ttl
must be smaller than or equal to
that of
max-ttl
.
<
1-65535
>
Number of detection packets sent at a time.
<
A.B.C.D
>
Source IP address.
<
1-60
>
Timeout duration (seconds) of a response packet to a detection
packet.
<
1-65535
>
UDP port number of the destination device.
Default
Default max-ttl: 30.
Default min-ttl: 1.
Default repeat: 3.
Default timeout: 3.
Default source: The default source IP address is IP address of the local egress directly
connected to the next hop.
Default udp-port: 33434.
4.17.3 set ipport enable/disable
Purpose
This command enables or disables a layer-3 port.
Command Mode
Layer-3 configuration mode
Syntax
set ipport
<
0-63
>{
enable
|
disable
}
Parameters
Parameter
Description
<
0-63
>
Number of a layer-3 port.
enable
Enables the layer-3 port.
disable
Disables the layer-3 port.
4-358
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
