Chapter 4 Service Configuration
4.2.25 set port protect
Purpose
This command enables or disables the port protection function.
Command Mode
All configuration modes
Syntax
set port
<
portlist
>
protect
{
enable
|
disable
}
Parameter Description
Parameter
Description
[<
portlist
>]
Port list.
enable
Enables the port protection function.
disable
Disables the port protection function.
Guidelines
After the port protection function is enabled, when the number of down times is greater
than or equal to 3 within 30 seconds, the port will be blocked for a protection period. After
the protection period expires, the port becomes active again.
Default
The port protection function is disabled.
Example
The following example enables the port protection function for ports 1, 5, 6, 7, and 11:
zte(cfg)#set port 1,5-7,11 protect enable
4.2.26 set port protect time
Purpose
This command sets the port protection period.
Command Mode
All configuration modes
Syntax
set port
<
portlist
>
protect time
<
1-10
>
4-61
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential