Zte ZXMBW E9200 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 63

Zte ZXMBW E9200 Скачать руководство пользователя страница 48

ZXMBW E9200 Indoor Pico Base Station User Manual

34

Confidential and Proprietary Information of ZTE CORPORATION

Upon completion of unpacking for acceptance, the representative
of user and the project supervisor sign on the Unpacking

Acceptance Report to acknowledge the acceptance. If goods are
to be kept by the user after acceptance, both parties sign on the

Unpacking Acceptance Report for confirmation, and then goods
will be handed over to the user.

Note:

Both parties must hold a copy of Unpacking Acceptance

Report and the project supervisor should give feed back for the

Acceptance Conclusion of this report to ZTE office for archiving
within seven days.

Cabinet Installation

The following introduces ZXMBW E9220 cabinet installation, and

installation modes such as wall-mount installation and pole-
mount installation.

ZXMBW E9200 Cabinet Installation
Introduction

The ZXMBW E9200 cabinet can be installed in two modes

depending on the installation environment.
The installation modes are:



Wall-mount installation



Pole-mount installation

Figure 24 shows the installation supporting parts of ZXMBW

E9200 cabinet.

Handover

Installation

Modes

Cabinet

Installation

Supporting

Parts

«
...
46
47
48
49
50
...
»

Содержание ZXMBW E9200
































































Отзывы:

Нет отзывов