14 Confidential and Proprietary Information of ZTE CORPORATION
Main / Guest Switch
: Enable or disable multi SSID.
Network Name(SSID)
: Service Set Identifier (SSID). Enter a string less than 32 characters as
the name for your wireless local area network (WLAN).
Broadcast Network Name(SSID)
: Disable or Enable (Default) this function. If
Enable
is
selected, the router broadcasts the SSID, and other routers can detect and connect to it. If
Disable
is selected, the other routers cannot detect the router. You can only connect to the router
by manual setting.
AP Isolation
: When
Enabled
is selected, each of your wireless clients will not be able to
communicate with each other. When
Disable
is selected, each of your wireless clients will be
able to communicate with each other.
Security Mode
: The security modes are described below:
1.
OPEN
: You can authenticate successfully with a SSID, whether it is valid or empty.
2.
WPA-PSK/WPA2-PSK
: Apply both the WPA-PSK and WPA2-PSK scheme.
3.
WPA2(AES)-PSK
: It is the securer version of WPA with implementation of the 802.11i
standard.
If the Authentication type is
WPA2(AES)-PSK
or
WPA-PSK/WPA2-PSK
, the bottom part of the
configuration page displays WPA parameters.
Max Station Number
: Set the maximum numbers of wireless network connecting to the router.
Advanced settings
Select
Settings > Wi-Fi Settings > Main SSID / Guest SSID
,
you can set the band selection, network
mode, channel bandwidth and etc.