•
IP Address
: Set IP address for the hosts
•
Port Range
: Set port numbers for the virtual server.
•
Protocol
: Set protocol for the virtual server.
•
Comment
: Type comment for the virtual server settings.
Click
Apply
to confirm your configuration. And the current virtual servers will be shown in the current
virtual servers in system area. Click
Reset
to uncheck boxes before all rules.
DMZ
Select
Firewall > DMZ
, the DMZ settings are shown in the following figure:
If you select
Enable
, set the DMZ IP address, and then click
Apply
to confirm your configuration.
System Security
Select
Firewall > System Security
, the system security setting is shown in the following figure:
29
