•
Default Policy
: Set how to handle the packet if none of the rules matches.
•
MAC address
: Set the MAC address that will be filtered.
•
Dest IP Address
: Set the destination IP address that will be filtered.
•
Source IP Address
: Set the source IP address that will be filtered.
•
Protocol
: Set which protocol will be used for filtering.
•
Dest Port Range
: Set the destination port numbers that will be filtered.
•
Source Port Range
: Set the source port numbers that will be filtered.
•
Action
: Set how to handle the packet if it matches with the rule.
•
Comment
: type comment for the filter settings.
Click
Apply
to confirm your configuration, or click
Reset
to clear your configuration.
The following figure shows you the current MAC/IP/Port filtering rules in system.
Click
Delete
to delete the selected rules, or click
Reset
to uncheck boxes before all rules.
URL Filter
Select
Firewall > URL Filter
, the URL Filter is shown in the following figure:
27