background image

C h a p t e r 

  3 

Internet Access 

The router does not require any drivers, and it supports all operating systems with Ethernet LAN 

capability, such as Windows 2000, XP, Vista, MAC OS X and Linux. The router supports two computers 

surfing on internet using Ethernet cables at the same time, and also supports Wireless LAN connection. 

 Notes:

 

All the parameter settings in this chapter are just for your reference. Please contact your service 

provider for detail. 

Preparation 

Before using the data service, make sure: 

 The modem is inserted into the router. 

 The Ethernet cable is connected properly. 

 The power light is on. 

 The PPP light is on. 

Web browser requirement: 

It is suggested that you use one of these web browsers to connect to the internet. 

 IE 6.0 or above 

 Netscape version 9.0 

Settings 

Do not change any settings unless instructed by your service provider. To make changes to your settings 

you need to disconnect the router from the network. After making changes reboot your router by turn off 

and on again. 

Login 

The router can be connected by RJ45 or by Wi-Fi (the SSID is “ZTE Wireless Network”). By either 

16

 

Содержание MF10





































Отзывы: