C88 User Manual
22
3.
Set Up Your Phone
This chapter outlines the steps required to set up your phone, power-on, and activate on
your service provider’s network. Follow the procedure below step-by-step to get started.
Battery
Please switch off your phone and disconnect the charger with it before removing the
battery. Avoid touching electronic components on the battery and battery compartment of
the phone.
Installing the Battery
1. Insert the battery to the plastic retainer clip. Make sure the + and – terminals on the
battery be lined up with the metallic points in the battery compartment.
2.
Push down on the bottom section of the battery until it clicks into place. It should be
aligned with the bottom of the phone.
3.
Place the battery cover so that it covers the entire battery. Slide the cover upwards
until it locks into position. Make sure the battery cover is secure.
1
2
3