Chapter 3 Initial Configuration
3-3
Indicator Status
Description
the alarm server interacts with the alarm box
properly.
Light on
Indicates the alarm server is disconnected
from the alarm box.
Note: If the indicator lights off, it indicates that the alarm server is not configured yet.
3.3 Icons on the LCD Screen
Icons on the LCD screen allow users to operate and configure the alarm box.
Table 3.3-1 lists the icons available on the LCD screen.
Table 3.3-1 Icon Description
Name Icon
Meaning
Alarm
sound
Indicates whether the alarm box generates
sounds when it receives alarms.
Mobile
phone
Indicates the working status of the mobile
phone module.
Network
connection
Indicates whether the alarm box is connected
to alarm servers.
Short
message
Indicates whether the short messages are sent
successfully.
Key
Indicates the direction keys “Up”, “Down”,
“Left”, and “Right”.
Indicates the
Cancel
key.
Indicates the
Menu
key.
Indicates the
OK
Key.
Mobile
signal
Indicates the mobile signal strength.
The first icon consisting of all solid lines
indicates the strongest mobile signal while the
last one indicates the weakest signal.
This icon is displayed only after the mobile
card is inserted into the alarm box.
3.4 Configuring the Alarm Box
The IP address, subnet mask, and UDP port of the alarm box can be
configured on the LCD screen. If the alarm box interacts with the alarm server
through TCP, the TCP port should be configured on the alarm server.
