ZSK SPRINT Series, Руководство по установке

Страница: 8 / 24

8
Quick change system for SPRINT Series
Disconnect the carriage by removing two fastening screws.
On the bottom of the carriage the connection is fixed by 2 locknuts.
The drive belt is now loosened from the carriage and can be moved
without barriers.
Fig. 9: Carriage, Disassembly
Rotate the drive belt carefully until you can reach the rear mounting screws of the
carriage.
Remove the 8 mounting screws incl. the locking washers from the two movable
pilot carriages and remove the carriage.
Fig. 10: Carriage (view from the bottom)
The countersunk screws are inserted with LOCTITE 290 and they
are sitting thightly. Be careful, when removing the screws in
order not to deform or distroy the cross slot.
Disassemble the two clevises by removing the 4 countersunk screws.
The countersunk screws are inserted with the glue LOCTITE 290.
Due to the relatively high effort which is needed to remove the
screws, it may, at the disassembly come to deformity of the screw
heads. Use the new countersunk screws from the package to fasten
the horizontal clamping fixture.
!