Page 4
LED Light Bracket Installation - Continued
FIG 19
FIG 18
FIG 20
FIG 22
FIG 24
FIG 5
FIG 23
LED Light Bracket Installation - COmplete
FIG 21
All Rights Reserved - Copyright ©2020 - ZROADZ LED, INC.
STEP 15
15) Inspect the LED and LED Mount Face Plate and
confi rm proper fi tment and alignment with the OEM Factory Grille.
STEP 13
13) Assemble the supplied ZROADZ LED Lights to the
LED Mounting Bracket Assemblies.
You may need to remove the protective plastic wrap
covering the LED Lens.
STEP 14
14) Put into place the fully assembled LED Mounts and secure it to the
OEM factory grille. Use the provided hardware to mount permanently.
You may fi nd it easier to access the hardware by clipping the grille tab off
as seen in Figure #20.
STEP 16
16) Finally go through and tighten all hardware that mounts LED to LED
Light Mounts and LED Light Mount Brackets to OEM Factory Grille.
SEE FIGURES 22 - 23
SEE FIGURES 18 & 19
SEE FIGURES 20
SEE FIGURE 21
STEP 17
17) To adjust the angle of your Light Bar, rotate the LED(s) to adjust the
angles till your desired light pattern is reached.
It is best to adjust the angle with the vehicle on level ground with lights
facing a wall, garage door or other solid barrier. We recommend checking
from a distance of 25’. Your installation is now completed.
ADJUSTMENT TIPS
TOP
BOTTOM
