Page 3
LED Light Bracket Installation - Continued
FIG 11
FIG 12
FIG 13
FIG 15
FIG 14
FIG 9
FIG 5
LED Light Bracket Installation - COntinued
TOP
BOTTOM
FIG 10
All Rights Reserved - Copyright ©2020 - ZROADZ LED, INC.
STEP 9
9) Assemble the mounting brackets to the ZROADZ face plate
according to the orientation seen in Figure #10.
STEP 8
8) Lay out all the supplied parts and prepare to mount ZROADZ LED
Mounting Brackets.
STEP 10
10) Put the ZROADZ LED Mounts into place behind the OEM Factory
Grille as seen in Figure #12 & Figure #13.
STEPS 11 & 12
11) Use the Bracket Mounts to determine and mark the drill holes.
12) Drill the (8) 1/4 holes into the OEM Grille. Note the Drill Hole locations
in Figures #15 - 17.
SEE FIGURES 11 - 13
SEE FIGURES 14 - 17
SEE FIGURE 9
SEE FIGURE 10
FIG 16
FIG 17
TOP
BOTTOM
