ZowieTek MegaDVR, Руководство пользователя

Страница: 15 / 47

Connecting HD MegaDVR Video Recorder
13
To connect MegaDVR, please see the diagram on
page 10. MegaDVR can connect external monitor &
video source (for example, an endoscope, surgical
camera, ultrasound, etc.).
1) If you are adding the MegaDVR to imaging
equipment that you are already using, please
unplug the existing video cable that connects
the monitor and the video source.
2) Connect a cable between the video output on
the video source and the appropriate video
input on the back panel of the MegaDVR.

Connect another cable between the video
output on the MegaDVR and the video
input on the monitor.

Depending on your video equipment, you
may need to use adapters to make the
connections.
3) Plug in the power cord.
4) You can also connect standard footswitches to
the back panel. A footswitch connected to the
"Photo" connector performs the same function
as the
Photo button on the front panel. The
"Video" connector performs the same function
as the
Video button.
It is recommended that new users begin by
recording onto a USB flash drive. Later, after you
have become familiar with the unit, you may wish to
record to USB mobile drive or the internal hard
drive.
※
The left indicating light will be red/green
depending on whether there is an available
drive attached.
Recording photo is simple. When you see an image
on your monitor that you would like to record,
simply press the
Photo button on the front panel.
The image will be saved directly to the USB flash
drive (later, you can transfer the images from the
flash drive to your computer). As an alternative to a
flash drive, you can record to the internal hard drive.
Each time you press the Photo button, an image is
recorded. Note that you can record images while
recording video clips. One thing confirms that you
have recorded an image:

You’ll hear the BEEP once when capturing a
photo.
※
The image will be saved in the “ ID_InfoList ”
folder.