3. Connect the red probe to the anode side and
the black probe to the cathode side of the
capacitor being tested.
4. Read the measured capacitance value on the
display once the reading is stablized.
Measure Frequency
1. Connect the black test lead to the COM
Terminal and the red lead
to the V
Ω
Hz
Terminal.
2. Turn the rotary switch to
(applies to low
frequency with high voltage), press SEL twice
to toggle to the Frequency Mode; or turn the
rotary switch to
(applies to high frequency
with low voltage).
3. Touch the probes to the desired test points.
4. Read the measured frequency value on the
display.
14
*Disconnect
circuit
power
and
discharge
all
capacitors before you test capacitance.
