2. Turn the rotary switch to
, press SEL twice
to toggle to the Diode Mode.
3. Connect the red probe to the anode side and
the black probe to the cathode side of the
diode being tested.
4. Read the forward bias voltage value on the
display.
5. If the polarity of the test leads is reversed with
diode polarity or the diode is broken, the
display reading shows
“
”
.
Measure Capacitance
1. Connect the black test lead to the COM
Terminal and the red lead
to the V
Ω
Hz
Terminal.
2. Turn the rotary switch to
, press SEL three
times to toggle to the Capacitance Mode.
13
*Do not input voltage at this setting.
*Disconnect
circuit
power
and
discharge
all
capacitors before you test diode.