background image

   

19    

Configuring the BIOS

This section discusses how to change the system settings through the BIOS Setup 
menus. Detailed descriptions of the BIOS parameters are also provided.

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software. Correctly 
setting the BIOS parameters is critical to maintain optimal system performance. 

Use the following procedure to verify/change BIOS settings.  
1.  Power on the computer., 
2.  Press the 

Del 

key when the following message displays at the bottom of the screen 

     during the Power On Self Test (POST).

 Pressing 

Del

 takes you to the BIOS Setup Utility.

Note: 1. We reserve the right to update the BIOS version presented in the manual. The 

              BIOS pictures shown in this section are for reference only.

          2. It is strongly recommended that you do not change the default BIOS settings. 

              Changing some settings could damage your system. 

Main Menu

This  menu  gives  you  an  overview  of  the  general  system  specifications. The  BIOS 

automatically detects the items in this menu.

Note: Users please note that the 

data in gray is non-changeable, 

and the others are for selection.

System Overview

 

  Displays the auto-detected BIOS information.

 

Processor

 

  Display the auto-detected CPU specification.

 

System Memory

  Displays the auto-detected system memory.

System Time/Date

  Allows you to set the system time/date.

Configuring the BIOS

Содержание M880G-ITX series



















































Отзывы: