Zotac GeForce 9300-ITX, Руководство пользователя

Страница: 69 / 78

68
GeForce 9300/9400 ITX Series Motherboard
Multi-adapter Mode
When Hybrid SLI is disabled, the system can be programmed to be in multi-adapter
mode by enabling both the dGPU and mGPU. This will allow the user to connect
displays to both the mGPU and the dGPU. The system can be put into multi-adapter
mode by setting the appropriate Hybrid SLI switches in the System BIOS settings. Go
into the system BIOS and go to
Advanced

Chipset to ensure that the following set-
tings are set to the values given:
q
Hybrid Enable:..............................Disabled
This disables hybrid functionality in the BIOS.
q
Onboard or mGPU Enable: ..........Enabled
When Hybrid is disabled, the Onboard GPU is automatically disabled. The user
must manually enable the mGPU to enable multi adapter mode.
q
Preferred or Primary Boot GPU:..dGPU
This sets the primary display adapter. This is automatically set to dGPU when
Hybrid is disabled.
q
mGPU Frame Buffer Control:.......Auto
q
mGPU Frame Buffer Size:............8MB
Note:
There may be differences in the menu items above depending upon the manufac-
turer of your motherboard.
Multi-adapter mode is also supported when Hybrid SLI is enabled. The system can be
put in Multi-adapter mode through the Hybrid SLI User Interface. The Hybrid SLI User
Interface chapter describes how the system can be put into Multi-adapter mode when
Hybrid SLI is enabled.