Zotac GeForce 8100, Руководство пользователя

Страница: 28 / 54

Set Supervisor/User Password
When this function is selected, the following message appears at the center of the
screen to assist you in creating a password.
ENTER PASSWORD
Type the password, up to eight characters, and press <Enter>. The password typed
now will clear any previously entered password from CMOS memory. You will be asked
to confirm the password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection. To disable password, just press <Enter> when you
are prompted to enter password. A message will confirm the password being disabled.
Once the password is disabled, the system will boot and you can enter BIOS Setup
freely.
PASSWORD DISABLED
If you have selected
“
System
”
in “Security Option” of “BIOS Features Setup” menu,
you will be prompted for the password every time the system reboots or any time you
try to enter BIOS Setup. If you have selected
“ Setup ”
at “Security Option” from “BIOS
Features Setup” menu, you will be prompted for the password only when you enter
BIOS Setup.
Supervisor Password has higher priority than User Password. You can use Supervisor
Password when booting the system or entering BIOS Setup to modify all settings. Also
you can use User Password when booting the system or entering BIOS Setup but can
not modify any setting if Supervisor Password is enabled.
Save & Exit Setup
Navigate to this option and press <Enter> to save the changes that you have made in
the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
press <Y> to save and exit, or press <N> to return to the main menu.
Exit Without Saving
Navigate to this option and press <Enter> to discard any changes that you have made
in the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box
appears, press <Y> to discard changes and exit, or press <N> to return to the main
menu.
Note: If you have made settings that you do not want to save, use the “Exit Without
Saving” item and press <Y> to discard any changes you have
Configuring the BIOS