Zotac G43-TX series, Руководство пользователя

Страница: 31 / 58

30
Intel G4X-ITX series Motherboard
Set Supervisor/User Password
Press <Enter> on the item “Set Supervisor Password” or “Set User Password” and type the
password with up to eight characters and then press <Enter>. You will be requested to confirm
the password. Type the password again and press <Enter>.
The BIOS Setup program allows you to specify two separate passwords:
v
Supervisor Password
When a system password is set and the Password Check item in Advanced BIOS Fea-
tures is set to Setup , you must enter the supervisor password for entering BIOS Setup and
making BIOS changes.
When the Password Check item is set to System , you must enter the supervisor password
(or user password) at system startup and when entering BIOS Setup.
v
User Password
When the Password Check item is set to System , you must enter the supervisor password
(or user password) at system startup to continue system boot. In BIOS Setup, you must
enter the supervisor password if you wish to make changes to BIOS settings. The user
password only allows you to view the BIOS settings but not to make changes.
To clear the password, press <Enter> on the password item and when requested for the pass-
word, press <Enter> again. The message “PASSWORD DISABLED” will appear, indicating the
password has been cancelled.